peanut sheller machine

Cashew Nuts Shellers, clean shelling, high productivity, low loss rate, small breaking rate; simple structure, reliable use,convenient adjustment, low power consumption, There is a certain versatility.

It is widely used in food, electronics, chemical and other industries. Such as peanuts, cashews, walnuts, pistachios, almonds, broad beans and other granular nuts and materials, the roasted products are evenly heated, the temperature difference between inside and outside is small, does not deform, and does not change color; the roasting speed is controlled by stepless frequency conversion speed control, and the efficiency is high; Double temperature control heating, less energy waste, energy saving; Small size, space saving and cost saving;
It can be used in connection with the production line, with one side feeding and the other side discharging. Synchronous control to reduce defects;

Chocolate coating machine is equipped with a sugar coating pot of 30 degrees Angle you can place a heating equipment (such as electric or gas) under the pot, made of stainless steel, clean and durable.
It can be Matched with a electrochemical type blower, and there is an air outlet stretch into the pot making heating or blowing cold, adjustable.

This machine is mainly used for the early peeling treatment of peanuts, almonds, broad beans, soybeans and mung beans in food and beverage production. The almonds soaked in hot water are poured into the hopper of the peeling machine, and the rubber skin is rubbed by the peeling rubber ring, and the skin and kernel are automatically separated through the separation device.

Baking machine Mainly used for baking peanuts, peanut fruit, peanuts, chestnut, walnuts, almonds, swallow beans, coffee beans, melon seeds and other granular nuts food. baking is not with the fireworks contact, baking in the process of baking materials in the drum by the spiral to continuously promote the formation of continuous rolling, so that the heat evenly,
Effective to ensure the baking quality, color, taste.

The Cashew Nut & Kernel Separator: separate the cashew nut shell and kernel.

This machine is a small coffee dried fruit shelling machine, which can shell and dry coffee beans
The processing capacity per hour is about 50 kilograms, which is suitable for coffee farmers with small output. It is also a very practical small device for coffee buyers to remove samples. It can automatically separate coffee beans and coffee shells, and one-button start to easily complete coffee shelling , Is a very practical small coffee dehulling equipment.

HL series peanut sheller is a popular product developed by our factory according to the demand of peanut market at present. Its main characteristics are low breakage rate, clean sorting, good color and less impurities of processed peanut, and all indexes meet the national standards. Our factory has strong technical force, complete equipment, advanced technology testing means, and is well received by the majority of users with high-quality products and thoughtful service.

Fresh coffee peeling machine is mainly used for fresh coffee peeling work after picking. This machine is not like manual peeling machine’s heavy work. It has the characteristics of high production efficiency, good peeling effect, simple structure and convenient operation and maintenance. It is a necessary equipment for fresh coffee processing.

Baking machine Mainly used for baking peanuts, peanut fruit, peanuts, chestnut, walnuts, almonds, swallow beans, coffee beans, melon seeds and other granular nuts food. baking is not with the fireworks contact, baking in the process of baking materials in the drum by the spiral to continuously promote the formation of continuous rolling, so that the heat evenly,
Effective to ensure the baking quality, color, taste.

The TPFL sesame peeling machine is a special equipment in the sesame peeling process. Its main purpose is to soak, peel and separate the skin and kernels of sesame seeds.

This machine is mainly used for the hard peeling of walnuts and macadamia nuts. The output and the completeness of the kernels are different depending on the variety of walnuts. One is to adjust the gap between the inner drum and the outer drum to achieve the best peeling. Shell effect. The upper part of the machine feeds, and the shell is discharged from the inside of the machine.

Product Description
1.This peanut butter machine is maily used to crush material into paste. jam in food, medician,chemical area.
2. The raw material could be peanut, sesame , Cocoa, almond etc.
3. The final paste is more fine and have big capacity.

With electricity (microwave) heating (coal, gas, oil) as a heat source, using the principle of thermal radiation drying (baking) material, by circulating hot air and hot air blower to achieve material is heated evenly, effectively guarantee drying (baking) materials the quality, color and taste. By feeding component transfer belt, motor, transmission, circulating fan, body, electrical
control boxes and other components, by regulating the speed, and set the temperature of the roast material, effectively ensure the best baking results and so on.

The whole machine adopts
lasercutting technology. Using welding process to fix the whole frame.It is more solid and stable than using ordinary screw to fix,and not easy to loose parts or structural deformation.The baking
machine can be connected with the computer, to achieve the output of baking curve,bring more
accurate operation for your baking. Baking capacity from 0.5kg to
2.5kg all can be bake out of the taste you want.

The Industrial roaster machine is mainly used for peanuts, beans, coffee beans, melon seeds, nuts, rice,coffee & beans and other drying and baking hot goods, the use of rotary drum, heat conduction, heat radiation principle. You can use a variety of ways as aheat source, baked goods taste pure. With energy-saving security, health convenience, easy operation and so on.

Structural principle:
The new chopper is based on the original chopper. The material is fed from the conveyor belt so that the material to be cut can be evenly scattered in the hopper, which is conducive to uniform cutting. The rough cutting of the upper knife is used, and the grading screen is adopted. The qualified particle size materials are directly discharged and unqualified. The granular material is then finely cut by the next knife to avoid repeated cutting of the qualified material to the lower cutter to reduce the consumption of material and oil. The gap between cutters can be adjusted to facilitate the cutting out of different specifications of materials.

2kg is very suitable for home or small coffee shop to use .The whole machine adopts
lasercutting technology. Using welding process to fix the whole frame.It is more solid and stable than using ordinary screw to fix,and not easy to loose parts or structural deformation.The baking
machine can be connected with the computer, to achieve the output of baking curve,bring more
accurate operation for your baking. Baking capacity from 0.5kg to
2.5kg all can be bake out of the taste you want.

Cocoa beans feed, the first drop in the bucket evenly feeding,rolling off by the roller off peeling, and then ventilated by the wind will take off the skin to the machine outside the storage,peeling after the cocoa beans through the material outlet ,By adjusting the size of the wind, peeling gap size,achieve the separation of all peeled skin.

coated peanut production line is widely used for coating & roasted or frying peanut, broad bean, cashew nut, soybean, green bean etc.